esd diodes 1 publication date: september 2007 ske00033aed this product complies with the rohs directive (eu 2002/95/ec). mazmxxxhg series silicon planar type for surge absorption circuit features ? four elements anode-common type ? power dissipation p d : 150 mw absolute maximum ratings t a = 25 c parameter symbol rating unit power dissipation * p d 150 mw junction temperature t j 150 c storage temperature t stg ? 55 to + 150 c common electrical characteristics t a = 25c 3c note) * :p d = 150 mw achieved with a printed circuit board. parameter symbol conditions min typ max unit zener voltage * v z i z specified value v zener rise operating resistance r zk i z specified value ? zener operating resistance r z i z specified value ? reverse current i r v r specified value a refer to the list of the electrical characteristics within part numbers 3 5 2 1 4 note) 1. measuring methods are based japanese industrial standard jis c 7031 measuring methods for diodes. 2. electrostatic breakdown voltage is 10 kv test method: iec1000-4-2 (c = 150 pf, r = 330 ? , contact discharge: 10 times) y 3. * : the temperature must be controlled 25c for v z mesurement. v z value measured at other temperature must be adjusted to v z (25c) v z guaranted 20 ms after current flow. package ? code ssmini5-f3 ? pin name 1: cathode 1 4: cathode 3 2: anode 1, 2, 3, 4 5: cathode 4 3: cathode 2 internal connection maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
mazmxxxhg series ske00033aed 2 this product complies with the rohs directive (eu 2002/95/ec). mazm062hg 5.8 6.2 6.6 5 0.2 4 50 100 6.2z mazm068hg 6.4 6.8 7.2 5 0.1 4 30 60 6.8z MAZM082HG 7.7 8.2 8.7 5 0.1 5 30 60 8.2z mazm100hg 9.4 10.0 10.6 5 0.05 7 30 60 10z mazm120hg 11.4 12.0 12.7 5 0.05 9 30 80 12z electrical characteristics within part numbers t a = 25c 3c v z (v) i r ( a) r z ( ? )r zk ( ? ) i z v r i z = 5 ma i z = 0.5 ma min nom max (ma) max (v) max max part number marking symbol zener voltage zener operating resistance reverse current (dc) p d ? t a i z ? v z i f ? v f r z ? i z s z ? i z c t ? v r 10 ? 3 468101214 10 ? 2 10 ? 1 1 10 10 2 zener voltage v z ( v ) zener current i z ( ma ) t a = 25 c mazm120hg mazm100hg MAZM082HG mazm068hg mazm062hg 0 025 0 200 150 100 50 50 100 150 200 250 ambient temperature t a ( c ) power dissipation p d ( mw ) cu foil t = 0.035 mm 10 mm 0.8 mm 10 mm 10 ? 2 0 0.4 0.8 1. 2 10 ? 1 1 10 10 2 forward voltage v f ( v ) forward current i f ( ma ) t a = 25 c 10 ? 1 1 10 10 2 zener operating resistance r z ( ? ) 11010 2 zener current i z ( ma ) t a = 25 c MAZM082HG mazm100hg mazm068hg mazm120hg mazm062hg 0 12 10 8 6 4 2 0 10203040506 0 zener current i z ( ma ) temperature coefficient of zener voltage s z ( mv / c ) t a = 25 c to 150 c MAZM082HG mazm068hg mazm062hg mazm100hg mazm120hg 0 10 0 20 4812 30 terminal capacitance c t ( pf ) reverse voltage v r (v) t a = 25 c mazm068hg mazm062hg MAZM082HG mazm100hg mazm120hg zener rise operating resistance maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
mazmxxxhg series 3 ske00033aed this product complies with the rohs directive (eu 2002/95/ec). ssmini5-f3 unit: mm 0.20 +0.05 ? 0.02 1.60 0.05 54 12 3 1.60 0.05 1.20 0.05 1.00 0.05 (0.5) (0.5) 0.55 0.05 0 to 0.05 (5 ) (0.27) 0.13 +0.05 ? 0.02 (5 ) 0.20 0.05 maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
request for your special attention and precautions in using the technical information and semiconductors described in this book (1) if any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) the technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) the products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod- ucts may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this book are subject to change without notice for modification and/or im- provement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (esd, eos, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. when using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
|
